version number in File Header Record
Dear sirs,
In the ISPG version 3.2 article 1.4.1 element 5, it is the version number of the IS-IDEC Specification.
What happen if the outdated instead of the current version number was used ?
Thank you. |
 |
Dear Kin Wong,
The file will fail validation, as we validate that you are sending the correct version of the file layout for processing.
Best regards
From:
Posted: Friday, June 03, 2011 5:49 AM
Subject: version number in File Header Record
Dear sirs,
In the ISPG version 3.2 article 1.4.1 element 5, it is the version number of the IS-IDEC Specification.
What happen if the outdated instead of the current version number was used ?
Thank you. |
|
Hi
I understand IS-IDEC Version 3.2 will be the SIS go-live version in September 2011.
When is next version expected/planned? How often do you expect versions to change? How much advance warning can be expected for any change in version? Will there be intermediate versons (3.2.1, 3.2.2, etc)?
It is surprising IS will not support concurrent versions of IS IDEC file for a period of time when there is a version upgrade.
Konda/QF
From:
Posted: Tuesday, June 07, 2011 3:29 PM
Subject: version number in File Header Record
Dear Kin Wong,
The file will fail validation, as we validate that you are sending the correct version of the file layout for processing.
Best regards
From:
Posted: Friday, June 03, 2011 5:49 AM
Subject: version number in File Header Record
Dear sirs,
In the ISPG version 3.2 article 1.4.1 element 5, it is the version number of the IS-IDEC Specification.
What happen if the outdated instead of the current version number was used ?
Thank you. |
|
Ashley,
We share the same concern with Konda, can we have your further comment ?
From:
Posted: Wednesday, June 08, 2011 12:22 AM
Subject: version number in File Header Record
Hi
I understand IS-IDEC Version 3.2 will be the SIS go-live version in September 2011.
When is next version expected/planned? How often do you expect versions to change? How much advance warning can be expected for any change in version? Will there be intermediate versons (3.2.1, 3.2.2, etc)?
It is surprising IS will not support concurrent versions of IS IDEC file for a period of time when there is a version upgrade.
Konda/QF
From:
Posted: Tuesday, June 07, 2011 3:29 PM
Subject: version number in File Header Record
Dear Kin Wong,
The file will fail validation, as we validate that you are sending the correct version of the file layout for processing.
Best regards
From:
Posted: Friday, June 03, 2011 5:49 AM
Subject: version number in File Header Record
Dear sirs,
In the ISPG version 3.2 article 1.4.1 element 5, it is the version number of the IS-IDEC Specification.
What happen if the outdated instead of the current version number was used ?
Thank you. |
|
Hi, IATA,
We have the same concern too. We also want to know that during production (that is after Spet 2011), how will you control the version? Is it mandatory for us to use the latest version at the time you release it?
Binbin(ACCA)
From:
Posted: Wednesday, June 15, 2011 4:51 AM
Subject: version number in File Header Record
Ashley,
We share the same concern with Konda, can we have your further comment ?
From:
Posted: Wednesday, June 08, 2011 12:22 AM
Subject: version number in File Header Record
Hi
I understand IS-IDEC Version 3.2 will be the SIS go-live version in September 2011.
When is next version expected/planned? How often do you expect versions to change? How much advance warning can be expected for any change in version? Will there be intermediate versons (3.2.1, 3.2.2, etc)?
It is surprising IS will not support concurrent versions of IS IDEC file for a period of time when there is a version upgrade.
Konda/QF
From:
Posted: Tuesday, June 07, 2011 3:29 PM
Subject: version number in File Header Record
Dear Kin Wong,
The file will fail validation, as we validate that you are sending the correct version of the file layout for processing.
Best regards
From:
Posted: Friday, June 03, 2011 5:49 AM
Subject: version number in File Header Record
Dear sirs,
In the ISPG version 3.2 article 1.4.1 element 5, it is the version number of the IS-IDEC Specification.
What happen if the outdated instead of the current version number was used ?
Thank you. |
|
Hello,
Is there an answer to this please?
Thanks,
Lori - DL
From: Accounting Centre of Chin
Posted: Wednesday, June 15, 2011 11:32 PM
Subject: version number in File Header Record
Hi, IATA,
We have the same concern too. We also want to know that during production (that is after Spet 2011), how will you control the version? Is it mandatory for us to use the latest version at the time you release it?
Binbin(ACCA)
From:
Posted: Wednesday, June 15, 2011 4:51 AM
Subject: version number in File Header Record
Ashley,
We share the same concern with Konda, can we have your further comment ?
From:
Posted: Wednesday, June 08, 2011 12:22 AM
Subject: version number in File Header Record
Hi
I understand IS-IDEC Version 3.2 will be the SIS go-live version in September 2011.
When is next version expected/planned? How often do you expect versions to change? How much advance warning can be expected for any change in version? Will there be intermediate versons (3.2.1, 3.2.2, etc)?
It is surprising IS will not support concurrent versions of IS IDEC file for a period of time when there is a version upgrade.
Konda/QF
From:
Posted: Tuesday, June 07, 2011 3:29 PM
Subject: version number in File Header Record
Dear Kin Wong,
The file will fail validation, as we validate that you are sending the correct version of the file layout for processing.
Best regards
From:
Posted: Friday, June 03, 2011 5:49 AM
Subject: version number in File Header Record
Dear sirs,
In the ISPG version 3.2 article 1.4.1 element 5, it is the version number of the IS-IDEC Specification.
What happen if the outdated instead of the current version number was used ?
Thank you. |
|
Hi all,
Could you please the answer for IS XML, too?
Thanks
Sandra - LH
From:
Posted: Thursday, July 07, 2011 10:26 AM
Subject: version number in File Header Record
Hello,
Is there an answer to this please?
Thanks,
Lori - DL
From: Accounting Centre of Chin
Posted: Wednesday, June 15, 2011 11:32 PM
Subject: version number in File Header Record
Hi, IATA,
We have the same concern too. We also want to know that during production (that is after Spet 2011), how will you control the version? Is it mandatory for us to use the latest version at the time you release it?
Binbin(ACCA)
From:
Posted: Wednesday, June 15, 2011 4:51 AM
Subject: version number in File Header Record
Ashley,
We share the same concern with Konda, can we have your further comment ?
From:
Posted: Wednesday, June 08, 2011 12:22 AM
Subject: version number in File Header Record
Hi
I understand IS-IDEC Version 3.2 will be the SIS go-live version in September 2011.
When is next version expected/planned? How often do you expect versions to change? How much advance warning can be expected for any change in version? Will there be intermediate versons (3.2.1, 3.2.2, etc)?
It is surprising IS will not support concurrent versions of IS IDEC file for a period of time when there is a version upgrade.
Konda/QF
From:
Posted: Tuesday, June 07, 2011 3:29 PM
Subject: version number in File Header Record
Dear Kin Wong,
The file will fail validation, as we validate that you are sending the correct version of the file layout for processing.
Best regards
From:
Posted: Friday, June 03, 2011 5:49 AM
Subject: version number in File Header Record
Dear sirs,
In the ISPG version 3.2 article 1.4.1 element 5, it is the version number of the IS-IDEC Specification.
What happen if the outdated instead of the current version number was used ?
Thank you. |
|
Dear all,
As of now, we plan to go live with the current version of the ISPG (v3.2). However, if the Pilot Testing phase manifests changes that may warrant a versioning change, this will be done before go-live.
After Sept 2011, releases will be done in a planned manner and advance notice will be provided. The details of the release management will also be communicated.
Best regards
From:
Posted: Thursday, July 07, 2011 12:21 PM
Subject: version number in File Header Record
Hi all,
Could you please the answer for IS XML, too?
Thanks
Sandra - LH
From:
Posted: Thursday, July 07, 2011 10:26 AM
Subject: version number in File Header Record
Hello,
Is there an answer to this please?
Thanks,
Lori - DL
From: Accounting Centre of Chin
Posted: Wednesday, June 15, 2011 11:32 PM
Subject: version number in File Header Record
Hi, IATA,
We have the same concern too. We also want to know that during production (that is after Spet 2011), how will you control the version? Is it mandatory for us to use the latest version at the time you release it?
Binbin(ACCA)
From:
Posted: Wednesday, June 15, 2011 4:51 AM
Subject: version number in File Header Record
Ashley,
We share the same concern with Konda, can we have your further comment ?
From:
Posted: Wednesday, June 08, 2011 12:22 AM
Subject: version number in File Header Record
Hi
I understand IS-IDEC Version 3.2 will be the SIS go-live version in September 2011.
When is next version expected/planned? How often do you expect versions to change? How much advance warning can be expected for any change in version? Will there be intermediate versons (3.2.1, 3.2.2, etc)?
It is surprising IS will not support concurrent versions of IS IDEC file for a period of time when there is a version upgrade.
Konda/QF
From:
Posted: Tuesday, June 07, 2011 3:29 PM
Subject: version number in File Header Record
Dear Kin Wong,
The file will fail validation, as we validate that you are sending the correct version of the file layout for processing.
Best regards
From:
Posted: Friday, June 03, 2011 5:49 AM
Subject: version number in File Header Record
Dear sirs,
In the ISPG version 3.2 article 1.4.1 element 5, it is the version number of the IS-IDEC Specification.
What happen if the outdated instead of the current version number was used ?
Thank you. |